Showing all 6 results
-
£27.57Morco Conversion Kit EUP11RS
Conversion / fitting kit for the Morco EUP11RS water heater.
PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers’ instructions.
-
£29.16
Morco Drain Screw Kit D51 & Old D61 FW0251 & FW0260
Kit comprising a replacement water housing union (FW0260) and drain screw (FW0251) to replace the larger old-type drain screw (FW0250).
-
£533.33
Morco EUP Room Sealed – LPG Caravan Water Heater – for Vertical flues
The Morco EUP11VER room sealed water heater is an alternative to the F11EL and provides identical power outputs. It is EUP compliant – which means it produces less NOx (Nitrogen Oxide). The fitting/conversion kit will be required in order to fit the water heater in all circumstances. This requires a Vertical Flue ONLY.
PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers’ instructions.
-
£534.10
Morco EUP11RS 11 Litre Water Heater
The Morco EUP11RS is a room-sealed water heater and is an alternative to the F11EL. It operates like its predecessor and provides identical power outputs. It complies with the strict new EUP legislation. This is a Europe-wide legislative change designed to make water heaters produce less NOx (nitrogen oxide). It has been in force since September 26th, 2018, and all water heaters made since then must comply if they are to be sold in Europe. The NOx emissions are reduced by cooling the temperature of the burner flame by more than 100 °C. This is achieved by using the water passing through the appliance to cool the flame. The level of NOx has been reduced to approximately 25% of historic levels.
Gas appliances should only be installed by a Gas Safe-registered installer and in accordance with the manufacturers’ instructions.
-
£29.48
Morco Flue Degree Roof Plate F-11E 5 RSF051
Morco 5 degree roof plate for use with the N250/F vertical flue kit.
-
£343.33
Morco Hydroblock Complete Kit GB24 ICB132001
Hydroblock complete kit for Morco GB24 (ICB132001). PLEASE NOTE: This is compatible with boilers which have a serial number beginning with AAZ or ACH. If you have a boiler with a serial number beginning with ADH or ADP you will require NSA962 (ICB132002E)
