Showing 57–84 of 170 results
-
£14.99Morco Diaphragm for Water Heaters D51, D61, G11, G101 & G111 (FW0180)
Diaphragm (FW0180)
-
£92.49
Morco Diaphragm Housing (MCB2192) Compatibility FEB24E FEB24ED FEB24ED3
Diaphragm housing (MCB2192). Suitable for use when repairing MCB2191 hydraulic assembly.
-
£29.16
Morco Drain Screw Kit D51 & Old D61 FW0251 & FW0260
Kit comprising a replacement water housing union (FW0260) and drain screw (FW0251) to replace the larger old-type drain screw (FW0250).
-
£534.10
Morco EUP11RS 11 Litre Water Heater
The Morco EUP11RS is a room-sealed water heater and is an alternative to the F11EL. It operates like its predecessor and provides identical power outputs. It complies with the strict new EUP legislation. This is a Europe-wide legislative change designed to make water heaters produce less NOx (nitrogen oxide). It has been in force since September 26th, 2018, and all water heaters made since then must comply if they are to be sold in Europe. The NOx emissions are reduced by cooling the temperature of the burner flame by more than 100 °C. This is achieved by using the water passing through the appliance to cool the flame. The level of NOx has been reduced to approximately 25% of historic levels.
Gas appliances should only be installed by a Gas Safe-registered installer and in accordance with the manufacturers’ instructions.
-
£123.30
Morco Fan Kit (ICB215001)
Fan kit (ICB215001) suitable for use with the Morco GB24/30 condensing LPG combination boiler.
-
£80.83
Morco FCB1046 – Air Pressure Switch (Grey/Green) 82/66
Morco air pressure switch FCB1046
-
£13.29
Morco FCB1080 – Thermistor – Suitable for LPG Boiler FEB24E and FEB24ED – FEB20E
Compatibility FA15/20 FEB20E FEB24E FEB24ED -
£9.33
Morco Flow Thermistor (ICB309001)
Flow Thermistor (ICB309001) suitable for use with the Morco GB24/30 condensing LPG combination boiler.
-
£29.48
Morco Flue Degree Roof Plate F-11E 5 RSF051
Morco 5 degree roof plate for use with the N250/F vertical flue kit.
-
£11.66
Morco FW0251 – Drain Plug 8mm complete with Washer (FW0597)
Small drain screw and washer (FW0251)
-
£41.66
Morco FW0302 Thermocouple Odd Type
Thermocouple for water heaters fitted with oxygen depletion device (FW0302) * For G111E water heaters.*
-
£14.99
Morco FW0391 Gas Isolation Valve G11
Gas isolation valve for Morco G11 accepts a 15mm feed.
-
£9.99
Morco Gas and Water Control Knob – Old MRS0020
Gas and water control knob (MRS0020) (Without Guide)
-
£9.99
Morco Gas and Water Control Knob MRS0021
Gas and water control knob (MRS0021) (With Guide)
-
£98.33
Morco Gas Valve (ICB205001)
Gas valve (ICB205001) suitable for use with the Morco GB24/30 condensing LPG combination boiler.
-
£70.79
Morco Horizontal Flue for F11E (RSF003)
Horizontal flue kit for the Morco F11E. PLEASE NOTE: that gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers’ instructions.
-
£40.83
Morco Horizontal Flue GB24 RSF303
Horizontal Flue Kit for Morco GB24-LPG PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers’ instructions.
-
£55.33
Morco Horizontal Flue Kit for EUP11RS
Horizontal flue kit for the Morco EUP11RS water heater.
Please note that gas appliances should only be installed by a Gas Safe-registered installer and in accordance with the manufacturers’ instructions.
-
£160.83
Morco Hydraulic Valve Kit (MCB2257) FEB24E – FEB24ED – FEB24ED3*
This is a pre-assembled hydraulic valve ready to fit onto the hydraulic assembly to help repair all FEB boilers. In addition there are seals, components and instructions to help replace and repair other hydraulic assembly parts which have either worn or become frost damaged or both. The diaphragm is installed within the assembly. (MCB2257)
-
£61.21
Morco Hydroblock Gasket Kit GB24 ICB102001
Hydroblock gasket kit for Morco GB24 (ICB102001).
