Showing 85–112 of 299 results
-
£24.77Morco Central Heating MCB2245 – CH Thermistor – FEB24E -FEB24ED – FEB24ED3*
CH Thermistor (MCB2245)
-
£30.60
Morco CH Low Pressure Switch (ICB131001)
Central heating low water pressure switch (ICB131001) suitable for use with the Morco GB24/30 condensing LPG combination boiler.
-
£19.08
Morco Conversion EUP6/EUP11 15mm Fitting Kit
A conversion/fitting kit is required for all Morco EUP11 (N222) water heaters and the Morco EUP6 (N228) gas water heater installations. The Morco N22 water heater fitting kit contains a 15-mm gas isolation valve.
Please note that gas appliances should only be installed by a Gas Safe-registered installer and in accordance with the manufacturers’ instructions.
-
£27.57
Morco Conversion Kit EUP11RS
Conversion / fitting kit for the Morco EUP11RS water heater.
PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers’ instructions.
-
£61.63
Morco CUI Printed Circuit Board (ICB303001)
CUI PCB Kit (ICB303001) suitable for use with the Morco GB24 condensing LPG combination boiler.
-
£30.42
Morco DHW Thermistor – Suitable for LPG Combi Boiler FEB20E – F11EL
DHW Thermistor (FCB1175)
-
£14.99
Morco Diaphragm for Water Heaters D51, D61, G11, G101 & G111 (FW0180)
Diaphragm (FW0180)
-
£92.49
Morco Diaphragm Housing (MCB2192)
Diaphragm housing (MCB2192). Suitable for use when repairing MCB2191 hydraulic assembly.
-
£42.40
Morco Diverter Valve Motor Kit (ICB111001)
Diverter Valve Motor Kit (ICB111001) suitable for use with the Morco GB24/30 condensing LPG combination boiler.
-
£24.99
Morco Drain Screw Kit D51 & Old D61 FW0251 & FW0260
Kit comprising a replacement water housing union (FW0260) and drain screw (FW0251) to replace the larger old-type drain screw (FW0250).
-
£533.33
Morco EUP Room Sealed – LPG Caravan Water Heater – for Vertical flues
The Morco EUP11VER room sealed water heater is an alternative to the F11EL and provides identical power outputs. It is EUP compliant – which means it produces less NOx (Nitrogen Oxide). The fitting/conversion kit will be required in order to fit the water heater in all circumstances. This requires a Vertical Flue ONLY.
PLEASE NOTE: Gas appliances should only be installed by a Gas Safe registered installer and in accordance with the manufacturers’ instructions.
-
£534.10
Morco EUP11RS 11 Litre Water Heater
The Morco EUP11RS is a room-sealed water heater and is an alternative to the F11EL. It operates like its predecessor and provides identical power outputs. It complies with the strict new EUP legislation. This is a Europe-wide legislative change designed to make water heaters produce less NOx (nitrogen oxide). It has been in force since September 26th, 2018, and all water heaters made since then must comply if they are to be sold in Europe. The NOx emissions are reduced by cooling the temperature of the burner flame by more than 100 °C. This is achieved by using the water passing through the appliance to cool the flame. The level of NOx has been reduced to approximately 25% of historic levels.
Gas appliances should only be installed by a Gas Safe-registered installer and in accordance with the manufacturers’ instructions.
-
£89.99
Morco Expansion Vessel Kit (ICB118002)
Expansion Vessel Kit (ICB118002) suitable for use with the Morco GB24/30 Sll condensing LPG combination boiler.
-
£123.30
Morco Fan Kit (ICB215001)
Fan kit (ICB215001) suitable for use with the Morco GB24/30 condensing LPG combination boiler.
-
£80.83
Morco FCB1046 – Air Pressure Switch (Grey/Green) 82/66
Morco air pressure switch FCB1046
-
£13.29
Morco FCB1080 – Thermistor – Suitable for LPG Boiler FEB24E and FEB24ED – FEB20E
Compatibility FA15/20 FEB20E FEB24E FEB24ED -
£69.99
Morco FCB1160 – Flow Switch Valve complete with Adaptor
Flow valve with adaptor (FCB1160)
